Space Invaders

September 17, 1999


==============================================================

This software has been tested on the majority, but not all,
computer systems and configurations.  We have attempted to
resolve issues as much as possible, but it is possible you may
experience video or audio problems with certain configurations.
Please contact your hardware manufacturer for technical
assistance or to obtain the latest drivers.

==============================================================

Space Invaders does not support dual monitor systems.

==============================================================

Allowing the screen saver to be active in the background can
cause some problems while playing Space Invaders.  Please make
sure to disable the screen saver before playing the game.

==============================================================

On the End of Episode Stats screen press ENTER to proceed. 

On the High Score screen use up arrow keys to change letters,
use left and right arrows to shift between cells.
Press ENTER to proceed.

==============================================================

If you experience a blank screen when attempting to run Space 
Invaders, but can here the audio playing through your speakers
attempt the following: In Windows 95 see if you have a video
card utility that will allow you to choose a standard SVGA 
monitor type. (Note do not use the standard monitor type
from the windows display properties, as it is not known to
fix this).  In Windows 98 try the same fix but you may also
have an option of changing the actual refresh rate of the video
card through the Display Properties.  To access go to - Start
- Settings - Control Panel - Double click on Display - Click
on the Settings tab - Click the Advanced button - Select the
Adapter Tab - Near the bottom you will see Refresh Rate change
this to adapter default.

==============================================================

Note:  If you decide to do a fresh install of Space Invaders
and wish to keep your saved games the files cnfg.map and
game.sav (which are located in the invaders\assets folder)
will need to be transferred to the invaders\assets
folder on the newly installed computer.

==============================================================

MINIMUM SYSTEM REQUIREMENTS:

Windows (r) 95/98 with 100% compatible computer system
Pentium (r) 150 MHz processor (166mhz recommended)
16 MB Ram (32 MB RAM recommended)
70 MB of uncompressed hard disk space
Quad-speed CD-ROM
100% Windows 95/98 compatible sound card and drivers 
Mouse
Joystick and Gamepad optional
PCI and AGP video card with 2 MB RAM or higher (3D accelerator
recommended)
16-bit High Color (640x480)

Additional Requirements For Hardware Accelerated Mode:
3-D Hardware accelerator with 100% Microsoft (r) 
Direct-3D-compatible drivers.

Important Note:
This product uses Microsoft's DirectX 6.1 technology, which 
requires your system to have the latest Windows 95/98 drivers
that fully support DirectX. If you need to reinstall Directx
Media go to <http://www.microsoft.com/directx/> and download
the newest version.

==============================================================

            Updates and Customer Support

                (available in English only)

	You may check our web page for updates to your game at:
	http://www.activision.com

Customer Support (English only)
        If you are uncertain of a game update and/or patch,
please E-mail all questions to our Internet mailing address at:

	support@activision.com

TotalAccess 2.3 
for Microsoft Windows 95 and Windows 98
Read Me Notes
March 8, 1999

==================================================================

Earthlink Information

==================================================================

********************* IMPORTANT, PLEASE NOTE *********************

This CD-ROM may contain certain Microsoft files.
These files, and your use of these files are subject to your
end user license agreement for Microsoft Windows 95.

******************************************************************

This Read Me file contains last-minute product information for
TotalAccess 2.3 for Microsoft Windows 95 and 98.

For full instructions on using the TotalAccess please see the
TotalAccess 2.3 Online Guide, which can be found in the file
ACCESS.HLP in the installation folder.


TABLE OF CONTENTS

This document contains the following sections:

    SYSTEM REQUIREMENTS
    INSTALLING TOTALACCESS
    UNINSTALLING TOTALACCESS


SYSTEM REQUIREMENTS
===================
 - x86-based personal computer (486 minimum; Pentium, or
   Pentium Pro recommended)
 - Microsoft Windows 95 or 98
 - 16 MB application RAM
 - 10 MB hard disk space minimum


INSTALLING TOTALACCESS
======================

To begin installation, insert the CD-ROM into your CD-ROM drive.
The Setup program will automatically be run from the CD-ROM. If
it does not start automatically, do the following:

1. Click the Start menu and then click Run.
2. Type: "D:\Win95\Setup", where D: is the drive letter of your
   CD-ROM drive.

NOTE to Customers of previous versions of TotalAccess:
If you have a previous version of TotalAccess on your machine,
the installation program will attempt to convert any existing
accounts to TotalAccess 2.3.  No attempt is made to overwrite,
modify or upgrade your existing version.


UNINSTALLING TOTALACCESS
=========================

To uninstall TotalAccess 2.3, carry out the following procedure:

1. Close any TotalAccess programs that are running (TotalAccess,
   EarthLink Dialer, EarthLink Toolbar and EarthLink Support
   Wizard).
2. Click the Start menu, point to Settings, and then click
   Control Panel.
3. Double-click the Add/Remove Programs icon.
4. On the Install/Uninstall tab, click EarthLink TotalAccess 2.3,
   and then click Remove.

NOTE: Some files may not be deleted during uninstall if they are
      in-use. These files will be removed when Windows is
      restarted.

==================================================================

(c) 1999 EarthLink Network Incorporated. All rights reserved.



